How To Fix DJI Phantom 3 Problems / Advanced Troubleshooting

  • Post author:

Hi guys, today’s article will be looking into How To Fix DJI Phantom 3 Problems & its Advanced Troubleshooting.

How To Fix DJI Phantom 3 Problems

A common observation is that a large number of people look for solutions to various DJI Phantom 3 problems. To help, I attempted to compile a comprehensive article addressing common and resolvable issues based on information from various DJI forums. By doing so, I hoped to assist those who were having problems with their Phantom 3 drones.

As a result, this article focuses on the most common issues with the DJI Phantom 3 and offers practical solutions to resolve them.

Common Problems with DJI Phantom 3 & How To Fix/Solve Them.

If you own a DJI Phantom 3 drone, you may have encountered some common issues that can interfere with your flying experience.

Some of these problems include:

  1. DJI Phantom 3 not connecting to the controller
  2. DJI Phantom 3 is not turning on.
  3. DJI Phantom 3 is not taking off.
  4. DJI Phantom 3 is not charging.
  5. DJI Phantom 3 is not updating firmware.
  6. DJI Phantom 3 keeps disconnecting =
  7. DJI Phantom 3 is not recording.

How To Fix DJI Phantom 3 Not Charging

One of the most common issues encountered by users is that their DJI Phantom 3 drone does not charge.

Outlined below are some possible solutions to fix the DJI Phantom 3 not charging problem:

Check The Battery

  • Check for physical damage or bulges and ensure that the battery is properly inserted into the drone.
  • If there is visible damage or bulges, stop using the battery and replace it immediately.

Check The Charger

  • Examine the charging cable for any signs of damage or wear and tear.
  • Check the charger’s LED indicator lights to ensure that it is working properly.

Check the charging port

  • Examine the DJI Phantom 3 drone’s charging port for dirt or debris.
  • Carefully clean the port with a soft brush or compressed air. 

Reset the battery and drone

  • Try turning the battery and drone off and on again to reset them.
  • Press and hold the power button for 10 seconds to reset the battery.
  • Follow the instructions in the user manual to reset the drone.

Upgrade firmware and app

  • Check if there are any available firmware or app updates and upgrade them if needed

By following these steps you should be able to fix the DJI phantom 3 not charging issue. if the problem persists,  it may be time to contact DJI support for further assistance.

How To Fix DJI Phantom 3 Not Connecting To The Controller

One of the most frustrating issues that  DJI Phantom 3 owners can face is when they are drones fail to connect to the controller.  there could be several reasons why this happens but with some basic troubleshooting, you can often resolve the issue quickly.

Below are some steps to help you fix the DJI Phantom 3 not connecting to the controller problem.

Ensure that the drone and controller are on the same frequency.

  • Check That the drone and controller are both set to the same frequency
  • The DJI Phantom 3 uses 2.4 GHz or 5.8 GHz frequencies,  and they need to match.

Rebind the controller to the drone

  • Turn on the controller and drone and press the linking button on the back of the controller. 
  • The linking button is located near the charging point on the back of the controller.
  • Press and hold the button until the controller beeps and the lead on the controller start to flash
  • Finally, wait for both the controller and drone to connect.

Check the controllers and Turner

  • Check the controllers and Tennessee and show it is undamaged and in the correct position
  • Make sure that the antenna is pointing in the same direction as the drone 

Upgrade firmware and app

  • Ensure that the DJ I go out and tell me where are updated to the latest version of

Reset the drone and controller

  • Turn off the drone and controller and then turn them back on again
  • Then try to connect to the drone and controller by reminding them.

Read More: Can A DJI Drone Be Tracked? Unleash the Secret

How To Fix DJI Phantom 3 Is Not Turning On

If your DJI Phantom 3 drone is not turning on, it can be a frustrating experience. However, you can often resolve the issue quickly with some basic troubleshooting.

Check the battery

  • Ensure that the battery is fully charged and correctly inserted into the drone.
  • Check for any visible physical damage or bulges on the battery.
  • If there is any visible damage or bulges, stop using the battery immediately and replace it.

Hard reset the drone

  • Remove the battery from the drone and wait for about 5 minutes.
  • Then, press and hold the power button on the drone for 10 seconds.
  • Reinsert the battery and try turning on the drone.

How To Fix DJI Phantom 3 Is Not Taking Off

It can be frustrating and worrying when your DJI Phantom 3 drone does not take off. This could happen for a variety of reasons, including calibration issues or motor problems. However, with some basic troubleshooting, you can often quickly resolve the problem.

Calibrate the drone

  • Make sure that the drone is on a flat surface, and that the compass calibration has been done.
  • Calibrate the gimbal and IMU by following the instructions in the DJI GO app.

Check the propellers

  • Check the propellers to make sure that they are correctly installed and undamaged.
  • Replace any propellers that are damaged or worn.

Check the motors

  • Check the motors to ensure that they are working correctly.
  • If the motors are not working, contact DJI support for further assistance.

How To Fix DJI Phantom 3 Is Not Updating Firmware

It can be a frustrating experience if your DJI Phantom 3 drone does not update its firmware. There are, however, some basic troubleshooting steps you can take to resolve the problem.

Check your internet connection

  • Ensure that your internet connection is stable and has a good signal.
  • Check if there are any firewalls or antivirus software that may be blocking the firmware update.

Check the SD card

  • Ensure that the SD card is correctly inserted into the drone.
  • Format the SD card to clear any issues.

How To Fix DJI Phantom 3 Keeps Disconnecting

If your DJI Phantom 3 drone keeps disconnecting from the remote controller or the DJI GO app and possibly flying in mid-air, it can be a nightmare. However, there are some basic troubleshooting steps you can take to resolve the issue.

The following steps will assist you in resolving the DJI Phantom 3 keeps disconnecting issue:

Check the Wi-Fi signal

  • Ensure that the remote controller and mobile device have a strong Wi-Fi signal.
  • Avoid flying in areas with high interference, such as near power lines or other radio signals.

Check the USB cable

  • Ensure that the USB cable is correctly connected between the mobile device and the remote controller.
  • Use a high-quality USB cable to avoid connection issues.

Use the correct flight mode

  • Ensure that the flight mode is set to the correct option.
  • Avoid using the GPS mode in areas with high interference or limited GPS signals.

How To Fix DJI Phantom 3 Is Not Recording

It can be a real hassle if your DJI Phantom 3 drone is not recording. There are, however, some basic troubleshooting steps you can take to resolve the problem.

Check the camera settings

  • Ensure that the camera is in the correct mode and is not set to playback mode.
  • Check if the camera is set to take photos instead of videos.

Check the SD card

  • Ensure that the SD card is correctly inserted into the drone.
  • Format the SD card to clear any issues.

Conclusion

In conclusion, the DJI Phantom 3 is a popular drone with great features and capabilities. However, like any electronic device, it may encounter problems that need fixing. Some of the most common issues that drone pilots face include not charging, not connecting to the controller, not turning on, not taking off, not updating firmware, and not recording. We have outlined some basic troubleshooting steps for each of these issues to help you fix them.

It is important to note that these steps are not exhaustive, and some issues may require more advanced troubleshooting or the help of a professional. It is also crucial to follow all safety guidelines and regulations when operating your DJI Phantom 3 drone.

By following the outlined steps and taking the necessary precautions, you should be able to address the most common problems that you may encounter with your DJI Phantom 3 drone. Remember to always stay safe and responsible while flying your drone to have a great flying experience.